Fabrication and Characterization in the Micro-Nano Range: by Andrés Fabián Lasagni (auth.), Fernando A. Lasagni, Andrés

By Andrés Fabián Lasagni (auth.), Fernando A. Lasagni, Andrés F. Lasagni (eds.)

This ebook exhibits an replace within the box of micro/nano fabrications suggestions of 2 and 3 dimensional constructions in addition to final 3 dimensional characterization equipment from the atom variety to the micro scale. a number of examples are provided exhibiting their direct program in numerous technological fields comparable to microfluidics, photonics, biotechnology and aerospace engineering, among others. the consequences of the microstructure and topography at the macroscopic homes of the studied fabrics are mentioned, including a close overview of 3D imaging techniques.

Show description

Read or Download Fabrication and Characterization in the Micro-Nano Range: New Trends for Two and Three Dimensional Structures PDF

Similar nonfiction_3 books

Colloquial Ukrainian: The Complete Course for Beginners

Colloquial Ukrainian is simple to take advantage of and no earlier wisdom of the language is needed. those CDs are recorded by means of local Ukrainian audio system and may play on any speakers. the cloth can be utilized by itself or to accompany the publication, aiding you with pronunciation and listening abilities.

Fabrication and Characterization in the Micro-Nano Range: New Trends for Two and Three Dimensional Structures

This publication exhibits an replace within the box of micro/nano fabrications suggestions of 2 and 3 dimensional buildings in addition to final 3 dimensional characterization tools from the atom diversity to the micro scale. numerous examples are provided displaying their direct program in several technological fields reminiscent of microfluidics, photonics, biotechnology and aerospace engineering, among others.

Additional info for Fabrication and Characterization in the Micro-Nano Range: New Trends for Two and Three Dimensional Structures

Sample text

31 lm. The laser fluence per pulse was 305 mJ/cm2. Reprinted figure with permission from Lasagni et al. [50], Copyright (2009) by IOP Publishing Ltd (Editor Mark Reed) Exploring the Possibilities of Laser Interference Patterning 19 In addition to controlling the surface topography of the CNT arrays, it is desired that the chemical properties as well as structure of the remained CNT are not changed. Consequently. the greater intensity of the G-peak with respect to the D-peak suggests CNTs with greater purity.

Micromech. Microeng. 15, 1121–1130 (2006) 44. : In-channel 3-D micromesh structures using maskless multi-angle exposure and their microfilter application. Sens. Actuators A 111, 87–92 (2004) 45. : Fabrication of three-dimensional photonic crystals using multibeam interference lithography and electrodeposition. Adv. Mater. 21, 3012–3015 (2009) 46. : Modelling the Marangoni convection in laser heat treatment. J. Phys. IV France 120, 299–306 (2004) 47. : Laser-beam interactions with materials–physical principles and applications, 2nd edn.

Also the duration and intensity of plasma heating is reduced by short laser pulses. In this section the possibilities and limits of laser machining of silicon by diode pumped Nd:YAG-lasers with harmonics generation are discussed. 1 Interaction of Laser Radiation with Silicon Silicon is one of the most thoroughly investigated materials. The vast majority of electronic components are based on semi-conducting mono-crystalline silicon. Polycrystalline and amorphous silicon is used in solar cell technology.

Download PDF sample

Rated 4.98 of 5 – based on 6 votes